Land Rover Freelander 2 TD4 e, 2009

Land Rover Freelander 2 TD4 e, 2009

The new Land Rover Freelander 2 TD4_e is Land Rover's most fuel-efficient vehicle to date. Featuring a new intelligent Stop/Start system, it is the first production vehicle to incorporate technologies from the company's programme of sustainable engineering initiatives, collectively named 'e_TERRAIN TECHNOLOGIES'.

On the standard EU4 cycle, the CO2 emissions of the Land Rover Freelander 2 TD4_e are reduced by 8 per cent, compared with the outgoing manual diesel Land Rover Freelander 2. Moreover, in additional tests, Land Rover engineers have measured fuel savings approaching 20 per cent in heavy urban traffic.

The 8 per cent improvement equates to a CO2 emissions reduction of 15 g/km compared with the standard Freelander 2 TD4 manual (from 194 g/km to 179 g/km). In terms of fuel efficiency, consumption is reduced from 7.5 l/100 km to 6.8 l/100 km, a saving of 0.7 litres of fuel every 100 km (62 miles).

These gains, coupled with the added benefits of the gearshift indicator light, software developments and efficiencies from low-rolling-resistance tyres, make the Land Rover Freelander 2 TD4_e the most fuel-efficient production Land Rover ever built.

Phil Popham, Land Rover's managing director, said: "The Stop/Start Freelander 2 is the first production vehicle to benefit from the massive £700 million investment in sustainable technologies by Jaguar and Land Rover. From mid-2009, the Stop/Start feature will be included as standard on all Land Rover Freelander 2 TD4 manual models, with no associated increase in list prices."

Land Rover's new Stop/Start system improves fuel efficiency in urban and stop-start driving. The vehicle automatically shuts down the engine in appropriate conditions, resulting in zero tailpipe emissions and saving fuel that would otherwise be used idling the engine when stationary. When the driver is ready to move off, the engine instantly re-starts.

Sophisticated controls ensure that the Stop/Start system does not compromise the needs of either the driver or the vehicle. For the engine to shut down, the vehicle must be stationary, the gearbox in neutral and the clutch pedal raised. To re-start, the driver simply depresses the clutch and the enhanced starter motor engages the engine, ready for when first gear is selected.

The Stop-Start system is automatically activated each time the ignition is turned on, although there is a switch on the fascia to disable the system, if the driver so desires.

Added fuel economy benefits
Along with the intelligent Stop/Start system, the Land Rover Freelander 2 TD4_e includes a series of additional enhancements that help to deliver fuel economy and CO2 benefits.

A new gearshift indicator light in the instrument pack advises the driver when to change gear if a higher gear will allow the vehicle to operate more fuel-efficiently. This is calculated by the Land Rover Freelander 2 TD4_e's fully mapped engine.
Software developments to the driveline systems on the Land Rover Freelander 2 TD4_e generate CO2 benefits without reducing Land Rover's renowned capability.

Land Rover engineers are also collaborating with tyre suppliers to drive improvements to fuel economy through reduced rolling losses. Tyre characteristics including rolling resistance are optimised for the entire range of available tyre sizes on Freelander 2 models.

Refined Stop/Start operation
Land Rover engineers have invested considerable effort in safeguarding levels of engine refinement. To reduce the engine shake associated with some diesel engines when stopping, the Land Rover Freelander 2 TD4_e features controlled throttle closing and ramps down fuel in a smooth fashion, while the alternator is also turned off during the shut-down procedure, reducing load on the engine. A software feature change and revised engine calibration further aid smooth shut-off, while engine shake on start-up is reduced by the Freelander 2's optimised engine-mounting strategy and inherent tuning.

Uncompromised durability
The increased frequency of stop-start cycles over the lifetime of the Land Rover Freelander 2 TD4_e will lead to increased use of the vehicle's affected components, so enhanced durability of these components was a priority for the Freelander 2's engineering team. They developed a new heavy-duty starter motor, a new ring gear, a new dual mass flywheel friction control plate and an absorption glass mat battery. These new features ensure that the Land Rover Freelander 2 TD4_e delivers characteristic Land Rover all-terrain performance and that the system's operation is always rapid and reliable.

Enhanced starter motor
The more frequent stop and start activity means that demands on the starter motor are forecast to increase up to threefold during the lifetime of the Land Rover Freelander 2 TD4_e. To accommodate the durability demands on the vehicle's 2 kW starter motor, a number of changes have been made.

The grease seals have been enhanced significantly and new hard-wearing copper contact material has been sourced and specified across the TD4_e range to enhance wear resistance within the starter solenoid.

New ring gear
An all-new ring gear is specified for all TD4_e models to cope with the increased frequency of starts. The ring gear is attached to the engine flywheel and comes into contact with the starter motor each time the engine is started. The new ring gear is manufactured from a harder grade of steel and contains over 25 per cent more carbon to improve durability.

Dual mass flywheel friction plate
Diesel-powered Freelanders with manual gearboxes have always featured a dual mass flywheel to ensure engine refinement at start, stop and low speeds. A new Polyetheretherketone friction control plate has been developed for the Land Rover Freelander TD4_e. This is able to withstand seven times the pressure of the outgoing plate, to ensure greater levels of refinement under even greater start and stop demands.

Absorption glass mat battery
New absorption glass mat technology has been developed, which offers deeper discharge and recharge characteristics and reduces battery deterioration under much heavier usage. Fine glassfibre matting has been introduced to sit pressurised between the new absorption glass mat battery plates. This aids the battery's longevity in two ways: by allowing the electrolyte to function normally under greater pressure and by providing mechanical support for the plates, reducing battery degradation.

Intelligent technologies
Land Rover engineers focus on the introduction of intelligent, appropriate technologies, and the Land Rover Freelander 2 TD4_e is no exception. In congested traffic, when the Stop/Start technology will shut down the engine frequently, other features and technologies will not be compromised, so in-car entertainment, climate control, Bluetooth, driver information and other electronic systems will continue to function.

Technologies such as the new voltage quality module, the battery monitoring system, the brake vacuum sensor and the enhanced climate control system have been developed to ensure that such services continue uninterrupted in a stop situation.

Voltage quality module
The voltage quality module maintains critical vehicle systems, safety and occupant comfort. It supplies a constant voltage around the vehicle's electronic components during a stop-start, ensuring that key services continue uninterrupted by the sudden outrush of amps from the battery.

This technology is effectively a direct current converter, which can convert low voltages, such as that experienced during a stop, to a stable higher level for short but crucial boosts, ranging from one to five seconds in duration.

Battery monitoring system
This system monitors the battery's 'state of health' to ensure that the Stop/Start feature functions reliably. The technology is constantly at work, measuring factors such as natural battery degradation, ambient temperature, charge and discharge activity and voltage, to make sure there is enough power available for an effective stop-start.

If any of these factors show a low measurement, the Stop/Start feature is overridden and the engine will continue running until more battery power is available.

Brake vacuum sensor
The Freelander 2's brake system is specified with significant vacuum reserves, but these reserves can become depleted for a number of reasons, such as use of the brake pedal when the engine is switched off. Ultimately this would lead to vacuum reserves becoming exhausted, which would affect the brake servo's operation and pedal loads, in some cases causing them to rise substantially.

To mitigate this, the brake vacuum sensor is specified on all Land Rover Freelander 2 TD4_e models, and if vacuum reserves fall to a level that will affect brake pedal loads, the system overrides the Stop/Start function until the brake vacuum is replenished - ensuring brake pedal loads are maintained.

Enhanced climate control system
A number of changes have been made to the Land Rover Freelander 2 TD4_e's climate control system to help ensure occupant comfort and reduce misting during stop-start situations.

One significant change is the introduction of an auxiliary water pump. On conventional vehicles, the water pump shuts down with the engine, but on TD4_e models, the introduction of the auxiliary water pump maintains the flow of coolant during engine shutdown, keeping a steady cabin temperature.

The climate control system monitors cabin temperature and maintains fan speed at a level that will protect the battery's state of charge when the engine is shut down. In extreme hot or cold conditions, extended stops, or if an occupant selects a higher fan speed during a stop, the engine will re-start if necessary to preserve occupant comfort.

Evaporator temperature, the factor that gives rise to screen misting, is also monitored and the enhanced climate control system will periodically cool the evaporator as necessary to mitigate misting during a stop-start. The system operates the windscreen defrost shutter and, if the evaporator is wet, the shutter will remain closed for a few seconds after an engine restart until the vapour is dissipated, again mitigating windscreen misting.

LAND ROVER e_TERRAIN TECHNOLOGIES
The Freelander 2 TD4_e is just one element of Land Rover's comprehensive green technology roadmap, which will drive the company to increasingly lower emissions and more sustainable technologies in the coming years. This is a key part of the £700 million investment in sustainable technologies being made by Jaguar and Land Rover.

Land Rover engineers are working on a series of advanced propulsion technologies and lightweight structures aimed at bringing CO2 emissions down to class-leading levels. This doesn't mean sacrificing core Land Rover values: the renowned all-terrain capabilities of its future vehicles could actually be improved by some of the exciting new powertrain technologies, such as the Electric Rear Axle Drive (ERAD) announced at the British International Motor Show in London earlier this year.

Mazda RX-8, 2009

Mazda RX-8, 2009

Launched in 2003, the Mazda RX-8 hit the global market with a serious bang. The RX-8 has won more than 50 global awards since its release including 2003 RJC Car of the Year in Japan Australia's Wheels magazine's Car of the Year for 2003, 2003 International Engine of the Year, 2004 Singapore Car of the Year, the 2004 U.S. Best Sports Car and UK Car of the Year 2004. It was also named on Car and Driver magazine's Ten Best list for 2004, 2005, and 2006. All together, Mazda has sold nearly 167,000 RX-8s around the world.

STYLING INNOVATION - REFRESHED DESIGN CUES PROVIDE "HIGHQUALITY" DYNAMISM

Mazda RX-8 was designed with an athletically sculpted exterior that provides a sense of originality that's unrivaled in the marketplace today. The new Mazda RX-8 receives design enhancements that are meant to freshen the styling and give Mazda RX-8 a new look, without impairing the basic design theme. Refinements for the new Mazda RX-8 include restyled front and rear bumpers and front fascia; sporty, high quality finish front and rear headlamps; and larger exhaust pipes (now measuring 90 mm across). The new Mazda RX-8 also offers a new five-spoke wheel design featuring a symbolic and sporty design reminiscent of the rotary engine, with different arrangements for each wheel size.

Taut muscular lines give Mazda RX-8 the liberating look of an athlete in motion. The muscular styling maintains classic sports car proportions while adding a Zoom-Zoom edge that is unmistakably Mazda.

The RX-8's unique "freestyle" four-door design is proof that a true sports car does not need to sacrifice space or convenience for performance. The advanced design of the rear-hinged rear doors provides a large door opening, allowing adult-sized passengers to easily enter and exit the vehicle. This design is also advantageous when securing a baby or a small child in the back seat. With a spacious rear seat area providing ample passenger room for four full-size adults, and enough trunk space for a weekend's worth of luggage, this sports car proves its versatility.

The Mazda RX-8's exterior styling presents a genuine sports car form, while the interior boasts a comfortable and intelligently designed cabin. Minor enhancements were made for the new Mazda RX-8 to provide a simple and functional interior design that supports driving pleasure. The center IP shape was redesigned to give a feeling of dynamic movement, a variable red-zone was added to the tachometer that will rise as the engine comes to operating temperature and a new steering wheel and redesigned front and rear seats are also added.

The rotary design element is incorporated through the interior of the Mazda RX-8 in creative ways, appearing in the seats. The stylish cabin also evokes a sense of luxury and high-end quality. Mazda's design team examined every aspect and component of the interior and has created an elegant, driver-centric atmosphere. Through the use of advanced ergonomic research, Mazda engineers determined that improper seating posture is a major cause of driver fatigue and built in optimum support in the front seats to help offset discomfort. In addition, the color of the Mazda RX-8's instrument cluster was developed to reduce eye fatigue and strain.

PERFORMANCE INNOVATION - MORE SPORTS CAR DRIVING PLEASURE

Through-and-through, the Mazda RX-8 is a pure sports car that gives the driver an exciting and dynamic experience. For the new Mazda RX-8, engineers improved body rigidity through the addition of structural reinforcements, by adding a trapezoidal strut tower bar and enhancing the local rigidity of the front suspension tower areas. Also, the rear suspension geometry has been reconfigured for better handling performance and driveshaft rigidity is improved, lowering NVH levels and improving performance.

In addition, the differential gear ratio on manual transmission-equipped cars is lowered from 4.444 to 4.777 for improved off-the-line performance. While minimal, these performance changes give Mazda RX-8 increased acceleration and performance, as well as even greater responsiveness to the accelerator pedal - always a rotary-engine and Mazda RX-8 hallmark.

To achieve this sophisticated dynamic, Mazda utilizes the advanced RENESIS (Rotary Engine genesis - or rebirth of the rotary engine) engine. The Mazda RX-8 remains the only mass-produced rotary-powered passenger car in the world. While exhibiting unusually high power output for a naturally aspirated engine, RENESIS outstrips comparable reciprocating engines in terms of acceleration, the feeling of power in reserve and quick response.

By turning a triangular rotor in a cocoon-shaped combustion chamber, the Mazda RX-8's rotary engine efficiently performs the four processes of intake, compression, combustion and exhaust. The RENESIS engine is remarkably smooth and high revving — all the way to 9,000 rpm (7,500 rpm on Sport A/T-equipped models) — and offers a smaller engine footprint than traditional internal combustion engines (some 60 percent smaller and lighter than a comparably powered V-6, and 40 percent smaller and lighter than a four-cylinder). In fact, the packaging and styling that define the Mazda RX-8 would not have been possible had Mazda engineers chosen a conventional piston engine.

Improving upon 40 years of rotary designs, the RENESIS engine features side intake and exhaust ports with nearly 30 percent more intake port and twice as much exhaust port than its predecessors. The efficiencies gained through shortening intake/exhaust overlapping period and using the larger intake and exhaust ports in delivering world-class performance.

The Mazda RX-8's normally aspirated 1.3-liter engine might appear diminutive to the untrained eye when compared to large-displacement V-8s or heavyweight V-10s or V-12s. However, through the incredible efficiencies of a rotary powerplant, an advanced three-stage intake system and an electronic throttle, the RENESIS engine delivers smooth, linear power on a grand scale.

The Mazda RX-8 uses an aluminum double-wishbone front suspension, reducing unsprung weight over the use of steel components. By mounting the upper and lower arms on a highly rigid sub-frame, the long arms ensure linear alignment changes throughout the jounce and rebound of the front wheels. All corners are fitted with mono-tube gas-filled shock absorbers designed with large-diameter internal pistons and valving, which offer excellent road feedback and a smooth ride.

Mazda RX-8, 2009

Mazda RX-8, 2009

Launched in 2003, the Mazda RX-8 hit the global market with a serious bang. The RX-8 has won more than 50 global awards since its release including 2003 RJC Car of the Year in Japan Australia's Wheels magazine's Car of the Year for 2003, 2003 International Engine of the Year, 2004 Singapore Car of the Year, the 2004 U.S. Best Sports Car and UK Car of the Year 2004. It was also named on Car and Driver magazine's Ten Best list for 2004, 2005, and 2006. All together, Mazda has sold nearly 167,000 RX-8s around the world.

STYLING INNOVATION - REFRESHED DESIGN CUES PROVIDE "HIGHQUALITY" DYNAMISM

Mazda RX-8 was designed with an athletically sculpted exterior that provides a sense of originality that's unrivaled in the marketplace today. The new Mazda RX-8 receives design enhancements that are meant to freshen the styling and give Mazda RX-8 a new look, without impairing the basic design theme. Refinements for the new Mazda RX-8 include restyled front and rear bumpers and front fascia; sporty, high quality finish front and rear headlamps; and larger exhaust pipes (now measuring 90 mm across). The new Mazda RX-8 also offers a new five-spoke wheel design featuring a symbolic and sporty design reminiscent of the rotary engine, with different arrangements for each wheel size.

Taut muscular lines give Mazda RX-8 the liberating look of an athlete in motion. The muscular styling maintains classic sports car proportions while adding a Zoom-Zoom edge that is unmistakably Mazda.

The RX-8's unique "freestyle" four-door design is proof that a true sports car does not need to sacrifice space or convenience for performance. The advanced design of the rear-hinged rear doors provides a large door opening, allowing adult-sized passengers to easily enter and exit the vehicle. This design is also advantageous when securing a baby or a small child in the back seat. With a spacious rear seat area providing ample passenger room for four full-size adults, and enough trunk space for a weekend's worth of luggage, this sports car proves its versatility.

The Mazda RX-8's exterior styling presents a genuine sports car form, while the interior boasts a comfortable and intelligently designed cabin. Minor enhancements were made for the new Mazda RX-8 to provide a simple and functional interior design that supports driving pleasure. The center IP shape was redesigned to give a feeling of dynamic movement, a variable red-zone was added to the tachometer that will rise as the engine comes to operating temperature and a new steering wheel and redesigned front and rear seats are also added.

The rotary design element is incorporated through the interior of the Mazda RX-8 in creative ways, appearing in the seats. The stylish cabin also evokes a sense of luxury and high-end quality. Mazda's design team examined every aspect and component of the interior and has created an elegant, driver-centric atmosphere. Through the use of advanced ergonomic research, Mazda engineers determined that improper seating posture is a major cause of driver fatigue and built in optimum support in the front seats to help offset discomfort. In addition, the color of the Mazda RX-8's instrument cluster was developed to reduce eye fatigue and strain.

PERFORMANCE INNOVATION - MORE SPORTS CAR DRIVING PLEASURE

Through-and-through, the Mazda RX-8 is a pure sports car that gives the driver an exciting and dynamic experience. For the new Mazda RX-8, engineers improved body rigidity through the addition of structural reinforcements, by adding a trapezoidal strut tower bar and enhancing the local rigidity of the front suspension tower areas. Also, the rear suspension geometry has been reconfigured for better handling performance and driveshaft rigidity is improved, lowering NVH levels and improving performance.

In addition, the differential gear ratio on manual transmission-equipped cars is lowered from 4.444 to 4.777 for improved off-the-line performance. While minimal, these performance changes give Mazda RX-8 increased acceleration and performance, as well as even greater responsiveness to the accelerator pedal - always a rotary-engine and Mazda RX-8 hallmark.

To achieve this sophisticated dynamic, Mazda utilizes the advanced RENESIS (Rotary Engine genesis - or rebirth of the rotary engine) engine. The Mazda RX-8 remains the only mass-produced rotary-powered passenger car in the world. While exhibiting unusually high power output for a naturally aspirated engine, RENESIS outstrips comparable reciprocating engines in terms of acceleration, the feeling of power in reserve and quick response.

By turning a triangular rotor in a cocoon-shaped combustion chamber, the Mazda RX-8's rotary engine efficiently performs the four processes of intake, compression, combustion and exhaust. The RENESIS engine is remarkably smooth and high revving — all the way to 9,000 rpm (7,500 rpm on Sport A/T-equipped models) — and offers a smaller engine footprint than traditional internal combustion engines (some 60 percent smaller and lighter than a comparably powered V-6, and 40 percent smaller and lighter than a four-cylinder). In fact, the packaging and styling that define the Mazda RX-8 would not have been possible had Mazda engineers chosen a conventional piston engine.

Improving upon 40 years of rotary designs, the RENESIS engine features side intake and exhaust ports with nearly 30 percent more intake port and twice as much exhaust port than its predecessors. The efficiencies gained through shortening intake/exhaust overlapping period and using the larger intake and exhaust ports in delivering world-class performance.

The Mazda RX-8's normally aspirated 1.3-liter engine might appear diminutive to the untrained eye when compared to large-displacement V-8s or heavyweight V-10s or V-12s. However, through the incredible efficiencies of a rotary powerplant, an advanced three-stage intake system and an electronic throttle, the RENESIS engine delivers smooth, linear power on a grand scale.

The Mazda RX-8 uses an aluminum double-wishbone front suspension, reducing unsprung weight over the use of steel components. By mounting the upper and lower arms on a highly rigid sub-frame, the long arms ensure linear alignment changes throughout the jounce and rebound of the front wheels. All corners are fitted with mono-tube gas-filled shock absorbers designed with large-diameter internal pistons and valving, which offer excellent road feedback and a smooth ride.

Mazda MX-5 Superlight Concept, 2009

Mazda MX-5 Superlight Concept, 2009

 

 

The Mazda MX-5 Superlight Concept is an answer to the world of automobiles and individual mobility moving towards energy efficiency, environmental compatibility and uncompromised safety - along with dynamic attributes and driving fun. In its efforts to offer pure driving enjoyment, while meeting its ecological and social responsibilities, Mazda has been focusing on weight reduction as a core base technology. For 20 years, reducing weight has been a tradition with the Mazda MX-5. It provided the inspiration for the radical design of Mazda's latest show car and its radical interpretation of the cult roadster.

Exterior Design
The Mazda MX-5 Superlight Concept was to strengthen these bonds even further. By doing this without a windshield, the retractable top and its frame, designers achieved an important step in this direction. As the Mazda MX-5 Superlight Concept, the allweather production roadster has mutated into a driving machine that lets sports car enthusiasts enjoy the natural surroundings unfiltered and tangible. Not only does the wind blow unimpeded during driving, pilot and co-pilot can also experience the sounds, smells and temperature changes of their immediate surroundings. And finally, the show car's intense bond between the driver and the technology of the vehicle gives it a unique closeness that can only be found in stronger form in the cockpit of a race car.

The Mazda designers created special roll-over bars, not only because they are very sporty-looking, but also to contribute to aerodynamic efficiency. These also make it clear that roll-over protection is important in this concept. And they prevent wind turbulence around the heads of the passengers, from whom the law would require the wearing of helmets while driving.

By removing equipment not vital to driving, and by replacing vital things with components that support the unique concept of the vehicle, designers sharpened the character of the Mazda MX-5 Superlight Concept.

Cause there is no windshield, for instance, there is obviously no need for wipers. The roadster show car's completely open design makes the need for outer door handles, side windows and their openers unnecessary. A single, filigree aluminium, wide-angle mirror gives a good view of the road behind. It's placed inside an extension of the bonnet. Front and rear lights are the same as those of the production model with additional LED lamps at the front, and brake lights at the back of each roll-over bar, which contribute to the roadster's sporty look.

The lack of a windshield required an extension of the original aluminium bonnet into the cabin. The attached sheet here is made of lightweight carbon fibre and provides a hood for the dashboard frame.

This also changed the proportions of the body's design, making the front of the car longer and the passengers seem like they are sitting further back towards the rear-drive axle, all of which is enhanced by the massive roll-over bars and their aerodynamic cladding. The Mazda MX-5 Superlight Concept translates the dramatic proportions of historical race cars into a very modern form.

Interior Design
The purity in design of the exterior also characterizes the interior design, which does not have aesthetics as ultimate goal, but was conceived to contribute to reducing vehicle weight. Driver and passenger of the Mazda MX-5 Superlight Concept are greeted by racing bucket seats made of ultra-lightweight carbon fibre. They are slide adjustable and upholstered with the same saddle coloured leather as the armrests, the steering wheel, and the lightweight aluminium shift lever and hand brake. Colour-coordinated four-point seatbelts hold the driver and passenger firmly in their seats.

The bonnet extension into the passenger cell provides a canopy for the dashboard, which makes the dashboard look smaller than the production Mazda MX-5. Made of lightweight plastic reinforced with fibreglass, it contains the same instruments as the production Mazda MX-5. These are held in place by a dashboard frame made of lightweight carbon fibre. Like a purebred race car, the Mazda MX-5 Superlight Concept has an ignition button in the centre of the dashboard, along with two emergency kill buttons for immediate fuel and electricity cut-off.

Supplying air and climate control to the open passenger compartment is only possible in limited form, so the show car has no air conditioning and no fans. Air-flow is increased when the roadster accelerates, and only small air vents are needed. The interior is made without any trim. Sound insulation mats and rugs do not meet the requirements of a purist roadster like this and are not used at all.

Mazda MX-5 Superlight Concept, 2009

Mazda MX-5 Superlight Concept, 2009

 

 

The Mazda MX-5 Superlight Concept is an answer to the world of automobiles and individual mobility moving towards energy efficiency, environmental compatibility and uncompromised safety - along with dynamic attributes and driving fun. In its efforts to offer pure driving enjoyment, while meeting its ecological and social responsibilities, Mazda has been focusing on weight reduction as a core base technology. For 20 years, reducing weight has been a tradition with the Mazda MX-5. It provided the inspiration for the radical design of Mazda's latest show car and its radical interpretation of the cult roadster.

Exterior Design
The Mazda MX-5 Superlight Concept was to strengthen these bonds even further. By doing this without a windshield, the retractable top and its frame, designers achieved an important step in this direction. As the Mazda MX-5 Superlight Concept, the allweather production roadster has mutated into a driving machine that lets sports car enthusiasts enjoy the natural surroundings unfiltered and tangible. Not only does the wind blow unimpeded during driving, pilot and co-pilot can also experience the sounds, smells and temperature changes of their immediate surroundings. And finally, the show car's intense bond between the driver and the technology of the vehicle gives it a unique closeness that can only be found in stronger form in the cockpit of a race car.

The Mazda designers created special roll-over bars, not only because they are very sporty-looking, but also to contribute to aerodynamic efficiency. These also make it clear that roll-over protection is important in this concept. And they prevent wind turbulence around the heads of the passengers, from whom the law would require the wearing of helmets while driving.

By removing equipment not vital to driving, and by replacing vital things with components that support the unique concept of the vehicle, designers sharpened the character of the Mazda MX-5 Superlight Concept.

Cause there is no windshield, for instance, there is obviously no need for wipers. The roadster show car's completely open design makes the need for outer door handles, side windows and their openers unnecessary. A single, filigree aluminium, wide-angle mirror gives a good view of the road behind. It's placed inside an extension of the bonnet. Front and rear lights are the same as those of the production model with additional LED lamps at the front, and brake lights at the back of each roll-over bar, which contribute to the roadster's sporty look.

The lack of a windshield required an extension of the original aluminium bonnet into the cabin. The attached sheet here is made of lightweight carbon fibre and provides a hood for the dashboard frame.

This also changed the proportions of the body's design, making the front of the car longer and the passengers seem like they are sitting further back towards the rear-drive axle, all of which is enhanced by the massive roll-over bars and their aerodynamic cladding. The Mazda MX-5 Superlight Concept translates the dramatic proportions of historical race cars into a very modern form.

Interior Design
The purity in design of the exterior also characterizes the interior design, which does not have aesthetics as ultimate goal, but was conceived to contribute to reducing vehicle weight. Driver and passenger of the Mazda MX-5 Superlight Concept are greeted by racing bucket seats made of ultra-lightweight carbon fibre. They are slide adjustable and upholstered with the same saddle coloured leather as the armrests, the steering wheel, and the lightweight aluminium shift lever and hand brake. Colour-coordinated four-point seatbelts hold the driver and passenger firmly in their seats.

The bonnet extension into the passenger cell provides a canopy for the dashboard, which makes the dashboard look smaller than the production Mazda MX-5. Made of lightweight plastic reinforced with fibreglass, it contains the same instruments as the production Mazda MX-5. These are held in place by a dashboard frame made of lightweight carbon fibre. Like a purebred race car, the Mazda MX-5 Superlight Concept has an ignition button in the centre of the dashboard, along with two emergency kill buttons for immediate fuel and electricity cut-off.

Supplying air and climate control to the open passenger compartment is only possible in limited form, so the show car has no air conditioning and no fans. Air-flow is increased when the roadster accelerates, and only small air vents are needed. The interior is made without any trim. Sound insulation mats and rugs do not meet the requirements of a purist roadster like this and are not used at all.

Mazda MX-5, 2009

Mazda MX-5, 2009

The Exterior Design: A Fusion of New Mazda Elements and an Unmistakable MX-5 Look
The front grille has been enlarged and changed from an oval shape to the five-point grille that forms part of the well-known Mazda family face. Combined with tautly styled headlights and lowing fog- lamp bezels, the new grille creates a reined and athletic expression.
The five points of the grille are slightly rounded the new shape of the front bumper, with corners that extend downwards, enhances the dynamic look and improves the aerodynamics.
The rear bumper has a new design that makes the rear look wider, sportier, and more integrated into the body. The rear combination lamps inherit the traditional MX-5 elliptical motif, and protrude further outboard for greater aerodynamic efficiency.

The Roadster Coupe's more Upscale Identity
The Mazda MX-5 Roadster Coupe, which features a groundbreaking powered roof system, also incorporates several design changes that further emphasize its more upscale identity and distinguish it from the soft-top version.
    * Front grille: Whereas the soft-top version has a in-type grille, the Roadster Coupe has a mesh grille that is framed by a chrome ring.
    * Headlamp inner bezels: The headlamp inner bezels are painted silver on the soft-top version, but have a chrome finish on the Roadster Coupe.
    * Fog-lamp inner bezels: The fog lamp inner bezels are black on the soft-top version, but are painted silver on the Roadster Coupe.
    * Outer door handles: The outer door handles are body-coloured on the soft-top version, but have a chrome finish on the Roadster Coupe.
    * High-mounted stop lamp: The high-mounted stop lamp has a red lens on the soft-top version, but a clear lens on the Roadster Coupe.

The New Wheel Designs
The MX-5 is available with 16-inch and 17-inch aluminium wheels. The 16-inch wheels have five sets of twin spokes for a lightweight look. The 17-inch wheels have 10 twisted spokes for a stronger impression of power and dynamism.

The Interior Design: Higher Than Ever Quality and Driver- Friendliness
The interior design delivers the Mazda MX-5's traditional combination of comfortable snugness below shoulder level and openness above shoulder level. It also reflects customer feedback in the form of enhanced quality and driver-friendly features.
The decorative surfaces on the instrument panel have been changed from glossy piano black to dark silver, which has a subtler, higher- quality look befitting a sports car. The meters have new graphics for higher legibility. The climate-control dials on the centre stack have each been given a silver-coloured ring for a higher-quality look. A protrusion has been eliminated from the outer surface of each door pocket to create more leg space. And the door and centre-console armrests have each been given a soft pad for a better feel.
Recaro seats designed exclusively for the MX-5 are available in certain regions. They are upholstered in leather and perforated Alcantara for a sporty look, and they combine excellent support with easy ingress and egress.

Evolved Jinba Ittai for Enhanced Fun-To-Drive
The Jinba Ittai feeling on which Mazda has always focused with the Mazda MX-5 defines the kind of spontaneous car-and-driver interaction that anyone can experience whether they're driving the MX-5 in town, on twisty roads, or on an open highway. With the latest facelift, Mazda engineers evolved the attributes in the "driving", "cornering", "braking", and "listening" categories in the fishbone chart to realize performance that lets drivers enjoy the feeling of oneness with the car to an even greater degree.

A 500 rpm Higher Rev Limit Maximizes Engine Potential for Greater Enjoyment
The powertrain has been enhanced to enable the driver to enjoy the full potential of the engine's performance (a key "fun to drive" aspect of the MX-5). Specifically, the speed at which the engine delivers maximum power has been raised from 6,700 rpm to 7,000 rpm (2.0-litre M/T version) and the rev limit has been raised from 7,000 rpm to 7,500 rpm (all 2.0-litre versions). Without these enhancements, the engine feels smooth and linear right up to the rev limit, even with the throttle wide open. With them, however, the driver can really experience the sensation of extracting every single horsepower out of the engine (the enhancements described here apply to the 2.0-litre grades with a manual transmission). The crucial 500 rpm increase in the rev limit is enabled by greater precision in the engine, namely: a forged crankshaft (this ensures the required rigidity at high engine speeds), fully floating pistons and newly designed valve springs.

A Sportier Engine Sound that Responds More Crisply to Accelerator Inputs
The engine sound (a key element in the "listening" category of the MX-5 fishbone chart) is a big part of the sports car experience. With the latest facelift, Mazda engineers made the Mazda MX-5 engine sound even better without causing aural discomfort for people outside the car. Notably, they increased the rigidity of the plastic surge tank in the intake manifold. The optimized surge tank combines with the new forged crankshaft to realize a clearer engine sound throughout the rev range. In vehicles with the six-speed manual transmission, the engineers also adopted a newly developed device called an Induction Sound Enhancer (ISE). This amplifies the pulses that occur when an accelerator input opens the throttle valve to increase air low into the engine, thereby delivering a more exciting sound to the cockpit. The intake sound created by the ISE feels synchronized with the driver's accelerator inputs, so the driver enjoys a crisp, thrilling engine sound even when using the accelerator pedal gently to adjust the revs for a downshift.

The Newly Evolved and Reined Transmissions
With the six-speed manual transmission, the meshing surfaces of the 1st-4th triple-cone synchronizers are now carbon coated, and the 3rd-4th synchronizer diameter has been increased. These improvements enable smoother shifts up to the engine's heightened rev limit of 7,500 rpm.
A six-speed Activematic automatic transmission that's newly available with the MX-5 for Europe incorporates two new control technologies. One is Direct Activematic (DAM), which allows the driver to quickly change gears using paddles on the steering wheel while still driving in the "D" range. It was developed to enable quick downshifts for three common situations: decelerating using engine braking on a downhill road; accelerating after decelerating into a corner; and overtaking another vehicle. (The driver does not need to select the "M" range before shifting down.) Since Direct Activematic enables engine braking and acceleration more quickly and easily, it makes driving easier and more fun. The other new technology is Active Adaptive Shift (AAS), by means of which the transmission control system evaluates the driving situation from factors such as the road's gradient and twistiness and the accelerator and brake inputs. When the system recognizes enthusiastic driving, it actively promotes upshifts and downshifts to realize a linear and sporty response that matches the driver's intentions.

An Athletic Design that Heightens Aerodynamic Performance
To improve handling stability, quietness, and high-speed fuel economy, the MX-5 development team drew on Mazda's expertise in incorporating aerodynamic improvements into styling that's faithful to a design theme. The main aerodynamic improvements are as follows:
    * air guides that protrude downward from the left and right corners of the front bumper
    * specification vehicles, except some specific markets)
    * protruding rear combination lamps
    * wider front tyre deflectors
The  Quieter Ride in the Roadster Coupe
Given the Roadster Coupe's more upscale positioning, the development team produced a quieter ride by reducing wheel resonance and adding damping and sound-insulating materials, such as urethane filling in the front suspension crossmember and damping material in the front part of the roof. Thanks to these improvements, road noise in the cockpit on a coarse road surface with the roof closed is 2.1dB lower than before. Quietness is further promoted in the Roadster Coupe and soft-top version by stiffer door modules and by newly added reinforcements on the No. 2 crossmember.

Mazda MX-5, 2009

Mazda MX-5, 2009

The Exterior Design: A Fusion of New Mazda Elements and an Unmistakable MX-5 Look
The front grille has been enlarged and changed from an oval shape to the five-point grille that forms part of the well-known Mazda family face. Combined with tautly styled headlights and lowing fog- lamp bezels, the new grille creates a reined and athletic expression.
The five points of the grille are slightly rounded the new shape of the front bumper, with corners that extend downwards, enhances the dynamic look and improves the aerodynamics.
The rear bumper has a new design that makes the rear look wider, sportier, and more integrated into the body. The rear combination lamps inherit the traditional MX-5 elliptical motif, and protrude further outboard for greater aerodynamic efficiency.

The Roadster Coupe's more Upscale Identity
The Mazda MX-5 Roadster Coupe, which features a groundbreaking powered roof system, also incorporates several design changes that further emphasize its more upscale identity and distinguish it from the soft-top version.
    * Front grille: Whereas the soft-top version has a in-type grille, the Roadster Coupe has a mesh grille that is framed by a chrome ring.
    * Headlamp inner bezels: The headlamp inner bezels are painted silver on the soft-top version, but have a chrome finish on the Roadster Coupe.
    * Fog-lamp inner bezels: The fog lamp inner bezels are black on the soft-top version, but are painted silver on the Roadster Coupe.
    * Outer door handles: The outer door handles are body-coloured on the soft-top version, but have a chrome finish on the Roadster Coupe.
    * High-mounted stop lamp: The high-mounted stop lamp has a red lens on the soft-top version, but a clear lens on the Roadster Coupe.

The New Wheel Designs
The MX-5 is available with 16-inch and 17-inch aluminium wheels. The 16-inch wheels have five sets of twin spokes for a lightweight look. The 17-inch wheels have 10 twisted spokes for a stronger impression of power and dynamism.

The Interior Design: Higher Than Ever Quality and Driver- Friendliness
The interior design delivers the Mazda MX-5's traditional combination of comfortable snugness below shoulder level and openness above shoulder level. It also reflects customer feedback in the form of enhanced quality and driver-friendly features.
The decorative surfaces on the instrument panel have been changed from glossy piano black to dark silver, which has a subtler, higher- quality look befitting a sports car. The meters have new graphics for higher legibility. The climate-control dials on the centre stack have each been given a silver-coloured ring for a higher-quality look. A protrusion has been eliminated from the outer surface of each door pocket to create more leg space. And the door and centre-console armrests have each been given a soft pad for a better feel.
Recaro seats designed exclusively for the MX-5 are available in certain regions. They are upholstered in leather and perforated Alcantara for a sporty look, and they combine excellent support with easy ingress and egress.

Evolved Jinba Ittai for Enhanced Fun-To-Drive
The Jinba Ittai feeling on which Mazda has always focused with the Mazda MX-5 defines the kind of spontaneous car-and-driver interaction that anyone can experience whether they're driving the MX-5 in town, on twisty roads, or on an open highway. With the latest facelift, Mazda engineers evolved the attributes in the "driving", "cornering", "braking", and "listening" categories in the fishbone chart to realize performance that lets drivers enjoy the feeling of oneness with the car to an even greater degree.

A 500 rpm Higher Rev Limit Maximizes Engine Potential for Greater Enjoyment
The powertrain has been enhanced to enable the driver to enjoy the full potential of the engine's performance (a key "fun to drive" aspect of the MX-5). Specifically, the speed at which the engine delivers maximum power has been raised from 6,700 rpm to 7,000 rpm (2.0-litre M/T version) and the rev limit has been raised from 7,000 rpm to 7,500 rpm (all 2.0-litre versions). Without these enhancements, the engine feels smooth and linear right up to the rev limit, even with the throttle wide open. With them, however, the driver can really experience the sensation of extracting every single horsepower out of the engine (the enhancements described here apply to the 2.0-litre grades with a manual transmission). The crucial 500 rpm increase in the rev limit is enabled by greater precision in the engine, namely: a forged crankshaft (this ensures the required rigidity at high engine speeds), fully floating pistons and newly designed valve springs.

A Sportier Engine Sound that Responds More Crisply to Accelerator Inputs
The engine sound (a key element in the "listening" category of the MX-5 fishbone chart) is a big part of the sports car experience. With the latest facelift, Mazda engineers made the Mazda MX-5 engine sound even better without causing aural discomfort for people outside the car. Notably, they increased the rigidity of the plastic surge tank in the intake manifold. The optimized surge tank combines with the new forged crankshaft to realize a clearer engine sound throughout the rev range. In vehicles with the six-speed manual transmission, the engineers also adopted a newly developed device called an Induction Sound Enhancer (ISE). This amplifies the pulses that occur when an accelerator input opens the throttle valve to increase air low into the engine, thereby delivering a more exciting sound to the cockpit. The intake sound created by the ISE feels synchronized with the driver's accelerator inputs, so the driver enjoys a crisp, thrilling engine sound even when using the accelerator pedal gently to adjust the revs for a downshift.

The Newly Evolved and Reined Transmissions
With the six-speed manual transmission, the meshing surfaces of the 1st-4th triple-cone synchronizers are now carbon coated, and the 3rd-4th synchronizer diameter has been increased. These improvements enable smoother shifts up to the engine's heightened rev limit of 7,500 rpm.
A six-speed Activematic automatic transmission that's newly available with the MX-5 for Europe incorporates two new control technologies. One is Direct Activematic (DAM), which allows the driver to quickly change gears using paddles on the steering wheel while still driving in the "D" range. It was developed to enable quick downshifts for three common situations: decelerating using engine braking on a downhill road; accelerating after decelerating into a corner; and overtaking another vehicle. (The driver does not need to select the "M" range before shifting down.) Since Direct Activematic enables engine braking and acceleration more quickly and easily, it makes driving easier and more fun. The other new technology is Active Adaptive Shift (AAS), by means of which the transmission control system evaluates the driving situation from factors such as the road's gradient and twistiness and the accelerator and brake inputs. When the system recognizes enthusiastic driving, it actively promotes upshifts and downshifts to realize a linear and sporty response that matches the driver's intentions.

An Athletic Design that Heightens Aerodynamic Performance
To improve handling stability, quietness, and high-speed fuel economy, the MX-5 development team drew on Mazda's expertise in incorporating aerodynamic improvements into styling that's faithful to a design theme. The main aerodynamic improvements are as follows:
    * air guides that protrude downward from the left and right corners of the front bumper
    * specification vehicles, except some specific markets)
    * protruding rear combination lamps
    * wider front tyre deflectors
The  Quieter Ride in the Roadster Coupe
Given the Roadster Coupe's more upscale positioning, the development team produced a quieter ride by reducing wheel resonance and adding damping and sound-insulating materials, such as urethane filling in the front suspension crossmember and damping material in the front part of the roof. Thanks to these improvements, road noise in the cockpit on a coarse road surface with the roof closed is 2.1dB lower than before. Quietness is further promoted in the Roadster Coupe and soft-top version by stiffer door modules and by newly added reinforcements on the No. 2 crossmember.

Fiat Fiorino Qubo, 2009

Fiat Fiorino Qubo, 2009

 

 

 

Fiat Fiorino Qubo is the name of the new vehicle being sold by the FIAT sales network. An original name that plays on the idea of "cube", which may not always be complimentary in all contexts, but in any case clearly evokes the strong points of this model: reliability and sturdiness, as well as unique and versatile functions. Not to mention the originality of changing the C of cube to Q to tell us that this vehicle is no ordinary cube, but rather a cube with a twist.

The Fiat Fiorino Qubo is targeted at a client who is a non-conformist oriented towards substance rather than show, a strong personality who is emanates confidence of his or her own well-informed choices.

Fiat Fiorino Qubo goes well beyond the concept of the MPV to venture as a pioneer into the concept of a "free space" vehicle, capable of satisfying a variety of needs for mobility. In fact, it is a highly functional vehicle with two sliding rear side doors, flexible interiors capable of offering up to sixteen different solutions. If so desired, it is also available with a front passenger seat that can be folded into a table and then flush with the boot level, making it possible to load objects measuring nearly 2.5 metres (a true record for a vehicle that measure only 3.9 metres).

The vehicle that lets you do anything you like, just as one would expect from a multipurpose vehicle, because it is as easy to handle as a city car and as spacious and comfortable as a MPV. But when compared to an MPV, the price is better for the same versatility and more compact dimensions (3959 mm long and 1684 mm wide, this boasts the best maximum capacity boot among all the vehicles in its class).

But that's not all; Fiat Fiorino Qubo manages to offer all this and at a highly competitive price, in keeping with other segment B vehicles, while including an integrated Blue&Me communications system (hands free, vocal and steering wheel commands, on-board text messaging, and a USB port).

Sales began in France in June 2008 and will continue over the summer months in Austria and Hungary. Italy, Poland, Switzerland, and Spain were next, while an October arrival is slated for Germany, Holland, Ireland, and November for Belgium and Greece (For 2009, Great Britain and Denmark should conclude the cycle).

Distinctive exterior styling and new-concept interiors
Essential and rational, the exterior styling of the Fiat Fiorino Qubo also sets itself apart for the specific side and rear body treatments that pump up its muscular personality. In the same way, not even the bold and rugged good-looks of the front can compromise the overall impression of a "unconventional yet likeable" vehicle, just as its solid appearance and "four wheels on the ground" attitude are counterbalanced by the fluid and clean lines that ooze dynamism.

These aesthetic peculiarities are in keeping with the compact exterior dimensions - 3.96 metres long, 1.72 metres tall, and 1.68 metres wide - which when united with a steering diameter of less than 10 metres, allows the new Fiat Fiorino Qubo to negotiate narrow downtown streets or the metropolitan traffic slaloms, becoming a new ingenious alternative to the city car and compact MPVs alike.

Fiat Grande Punto Natural Power, 2009

Fiat Grande Punto Natural Power, 2009

 

Fiat proudly presents the Fiat Grande Punto Natural Power, a new dual fuel (petrol/methane) version that confirms the brand's commitment to the field of environmental protection. This substantial commitment is reflected by Fiat's indisputable leadership in the field of cars with methane engines as original equipment (OEM): during the period January-August 2008 some 43,000 methane-driven Fiat vehicles were sold in Italy compared with 33,000 during the same period in 2007.

We should not forget that Fiat is the first and only manufacturer to offer, in its "Natural Power" range, a wide array of vehicles with methane-petrol dual fuel systems able to meet the mobility requirement of an extensive category of users: Multipla Natural Power, Punto Natural Power, Panda Panda Natural Power, Panda Panda Climbing Natural Power and Doblò Natural Power. Now comes the turn of the Fiat Grande Punto Natural Power, a new dual fuel car that sets standards of absolute excellence in several areas.

Firstly, a methane-driven Grande Punto proves itself to be a valid financial alternative to cars that run on conventional fuels (diesel and petrol) that are increasingly subject to rising prices. Suffice it to say that in Italy, for example, EUR 12 buys a full tank of natural gas and it costs just EUR 3.8 to cover 100 km.

Another virtue of the new model is its extraordinary range: when running on methane, it is able to cover 310 km with the tank filled to its full capacity of 84 litres. This record-breaking figure is increased by the 45 litre petrol tank capacity: this means that the Fiat Grande Punto Natural Power can be driven for more than 1000 kilometres without refuelling. So once you have a full tank you can drive with peace of mind, and in any case it is increasingly easier to refuel with natural gas because the network of service stations is extensive and continuously expanding (the number of service stations in Italy currently stands at 630).

The new model also offers a 1.4 8v Fire unit that is already compliant with the EURO5 directive and offers low CO2 emissions (just 115 g/km) that allow customers access to the maximum state incentives (EUR 2800 and 3 years of car tax if scrapped). The promotional launch price will start from EUR 12,300, complemented by 6 years of interest-free finance (offer valid to 31 December 2009).

Fiat Fiorino Qubo, 2009

Fiat Fiorino Qubo, 2009

 

 

 

Fiat Fiorino Qubo is the name of the new vehicle being sold by the FIAT sales network. An original name that plays on the idea of "cube", which may not always be complimentary in all contexts, but in any case clearly evokes the strong points of this model: reliability and sturdiness, as well as unique and versatile functions. Not to mention the originality of changing the C of cube to Q to tell us that this vehicle is no ordinary cube, but rather a cube with a twist.

The Fiat Fiorino Qubo is targeted at a client who is a non-conformist oriented towards substance rather than show, a strong personality who is emanates confidence of his or her own well-informed choices.

Fiat Fiorino Qubo goes well beyond the concept of the MPV to venture as a pioneer into the concept of a "free space" vehicle, capable of satisfying a variety of needs for mobility. In fact, it is a highly functional vehicle with two sliding rear side doors, flexible interiors capable of offering up to sixteen different solutions. If so desired, it is also available with a front passenger seat that can be folded into a table and then flush with the boot level, making it possible to load objects measuring nearly 2.5 metres (a true record for a vehicle that measure only 3.9 metres).

The vehicle that lets you do anything you like, just as one would expect from a multipurpose vehicle, because it is as easy to handle as a city car and as spacious and comfortable as a MPV. But when compared to an MPV, the price is better for the same versatility and more compact dimensions (3959 mm long and 1684 mm wide, this boasts the best maximum capacity boot among all the vehicles in its class).

But that's not all; Fiat Fiorino Qubo manages to offer all this and at a highly competitive price, in keeping with other segment B vehicles, while including an integrated Blue&Me communications system (hands free, vocal and steering wheel commands, on-board text messaging, and a USB port).

Sales began in France in June 2008 and will continue over the summer months in Austria and Hungary. Italy, Poland, Switzerland, and Spain were next, while an October arrival is slated for Germany, Holland, Ireland, and November for Belgium and Greece (For 2009, Great Britain and Denmark should conclude the cycle).

Distinctive exterior styling and new-concept interiors
Essential and rational, the exterior styling of the Fiat Fiorino Qubo also sets itself apart for the specific side and rear body treatments that pump up its muscular personality. In the same way, not even the bold and rugged good-looks of the front can compromise the overall impression of a "unconventional yet likeable" vehicle, just as its solid appearance and "four wheels on the ground" attitude are counterbalanced by the fluid and clean lines that ooze dynamism.

These aesthetic peculiarities are in keeping with the compact exterior dimensions - 3.96 metres long, 1.72 metres tall, and 1.68 metres wide - which when united with a steering diameter of less than 10 metres, allows the new Fiat Fiorino Qubo to negotiate narrow downtown streets or the metropolitan traffic slaloms, becoming a new ingenious alternative to the city car and compact MPVs alike.